The first day of spring is finally here!  It has been a long cold winter.  I have had the bike out only a couple of times.  But today I plan on riding.  But I wanted to post some of the additions to the bike since my last few posts.  I still have Mod fever!  I keep adding thing to the bike to make it more comfortable to ride and have fun.

Wind Guards

About the ride.  I took off down the parkway to exit 100.  I rode to Bradley Beach NJ.  For those of you not from the area, this place was hit hard but Hurricane Sandy.  The entire boardwalk is gone!  The good news is that the state and town are replacing it as we write this.  I am sure that it will be open for the summer.  The clean up from the storm is something that is an ongoing project.  On a personal note I still have clean up to do.  My fence is still torn up but with the very long and cold winter I have had to live with it.  Any how back to the ride....  After opening the bike up to 90+ on the parkway I settled into the side streets as a more moderate pace.  3 of my new purchases made this ride fun and WARM.  I recently added wind guards to the handle bar.  These little beauties cut the wind to the hands very nicely.  When I left the house it was 45 degrees so the wind would have made my hands quite cold if I did not have these installed.  I got them from here: http://www.nationalcycle.com/catalogue/CoolWeather.shtml

I also added some new clothing to keep me warm and dry this season.  Weeks ago I went to the motorcycle show in NYC.  I saw a new textile jacket that I liked from Scorpion.  The Commander II  jacket.  I really like this jacket.  It has 3 layers for comfort and warmth.  Lots of pockets and is a little longer than my other one.  I got it here... http://www.revzilla.com/motorcycle/scorpion-commander-ii-jacket  I also added some new "over pants"  Like the name implies these fit over my jeans.  The extra layer was really great on this cold day to ride.  I did not have long underwear on under the jeans and I was perfectly warm.  I also got them from these guys.  Great price too. http://www.revzilla.com/motorcycle/icon-overlord-textile-overpants

The ride was 2 hours long and man o man did I need it!

As for other items that I have added this winter.  I added a trunk a little while ago from viking bags.

Now that I have added a Reda can to the one saddlebag and rain gear the bags are getting full.  So for running around shopping (beer runs)  I needed a a little extra room.  this fits the bill nicely.  http://www.vikingbags.com/Motorcycle-leather-trunk-Bags-1285-prd1.htm

For longer trips that I have planned for this year I bought a new bag also from Viking.  This tail bag fits over the back seat or can fit on the luggage rack.  http://www.vikingbags.com/Viking-Expandable-Cruiser-Large-Tail-and-Tunnel-Bag-8161-prd1.htm  This is a very roomy bag for overnights and it has a detachable backpack for daytime excursions.  And like other stuff from them very well priced.

Needless to say I am looking forward to this season.  I hope to put on 10,000 plus miles on the bike and  see lots of new places.  I have been in contact with my meet up group about planned rides this summer and we have some exciting places planed.  Stay tuned!

My own personal Polar Bear Ride

I took the bike out on Monday December 24th.  The temperature was 37 degrees!  I do not have heated gear at the moment. ( waiting for the bike show in NY in Jan)  So I just bundled up in layers.  I swapped out my riding jacket for my ski jacket and some snowmobile gloves the cover my wrists almost mid for arm.  I was snug as a bug.  I left the house and traveled toward the shore.  I had not had a chance to see the devastation of the NJ beaches from hurricane Sandy up close.  As I drove thru Red Bank on Navesink River Road   Past the huge houses on this great twisty road I continued on into Highlands over the Sea Bright Bridge and into Sea Bright NJ

In Sea Bright I got to see the after effects of the storm.  From the point just after the bridge to Monmouth Beach the area is devastated.  Almost all of the business that are on the main road are gone,  just gone.  Boarded up and gutted.  Pizza places, dry cleaners, ice cream parlors, restaurants, grocery stores, clothing stores are all gone.  Above the store fronts are apartments that are also cleaned out.  It was a tough site to see.  All of the beach clubs on the Ocean site are also destroyed.   For those of you that never have been the this part of the NJ shore it was and will be again, a beautiful place but now it is in ruins.

I continued down Ocean Boulevard towards Long Branch. As I passed thru Monmouth beach the devastation continued.   The water crested above the sea wall and the fist floor of a number of houses were flooded.  Boarded up property everywhere.  Then after I passed a traffic light and entered Long Branch everything changed and it was as if nothing happened.  There were still some effects of the storm but no major damage.  It was surreal to see.  I pulled into Pier Village  The board walk was a little torn up but still open and the shops in the center were open for business.  I stopped at the coffee shop to warm up.  Removing some of my many layers and getting something warm to drink I realized that I was cold but not freezing.  The layers worked!  I spoke to the gal at the counter about the storm and she said while they lost power for a while nothing flooded and no windows broke.  She was grateful because she could still go to work.  The folks in Sea Bright will not be returning for some time.

After warming up a bit I headed home.  I took the scenic route to Atlantic Highlands on Ocean Boulevard.  A great road with lots of twisty's!  I took a spin thru the marina and headed home.

The trip was only 45 miles or so but just being on the bike on Christmas Eve was the best!  I returned a little colder than I would have liked but it was totally worth it!

Clearwater Lights New LED's!

Insatal manual and crash bar mounts

 I don't know about you but my vision is not the same at night as it once was.  Must be something with getting older.  Anyhow.  I noticed that the stock headlight on the C50T just does not throw off enough light at night.  I have been riding with a great group of people here in Nj and I noticed a number of them added LED lights to the front of their bikes.  Some of them are really bright and make the bike very visible during the day time trips.  It is at night however that the difference is really apparent.  I looked at the various motorcycle forums and  found a number of answers.  I chose the Clearwater Lights "Glenda" model for the bike.  http://www.clearwaterlights.com  One of the main reasons that I chose these lights is the fact that you can dim the lights with a separate dimmer switch.  When riding with my friend that have theirs always on the excessive brightness is difficult to handle when they are behind you.    

The dimmer switch.

Add caption

Because I added lowers to the bike I can not mount them on the front forks.  So I will be adding them to the crash bars.  This is a separate Kit for the crash bar mount.  Also I am not technically savvy enough to perform this installation my self so I will be going to the dealer to have them put them on.  

About 2"

About 2"

Crash bar mount in back of light

I am really looking forward to having these on the bike.  Not only to improve my vision at night but also to improve my signature to the cagers on the road!


More updates follow.

Well I have finally had the Clearwater light installed on the bike.  I have yet to take it out a night but the installation went well.  They look great and now I can be seen during the day.  I have a flash to pass feature on the bike.  When you hit this switch the high beams flash.  The clearwater light are hooked up to this switch so when I hit the button the clearwater lights go to full power.  They are alos hooked up the to the high beams to go to full power.

Saddle Bag Locks

I finally added locks to the saddle bags this past weekend.  One of the concerns we all have is when leaving our bike at the store, restaurant, Mall , or the beach is other people stealing our stuff.  I don't keep  valuables in the bags, but tools cost money and losing them would be a major pain in the tush.  The stock bags from Suzuki have thumb locks.  I did a lot of research on line and found a post on the Suzuki Volusia Forum http://www.volusiariders.com/47-custom-mods/217728-saddlebag-locks-my-c50t.html  The mod looked fairly easy so I gave it a try.

It took about an hour to do both sides and I am really happy with the results.  The part is a Harley Davidson part.  http://www.surdyke.com/AdvPartInfo.asp?PartNumber=90300017  I bought it from this retailer too.

I have had them in my garage for about 4 months and finally found the time to put them on the bike.

What you need to do this quickly:

Dremel tool  Always wanted to get one and this was a good reason to do it!
Drill with 5/8 bit.
Small crescent wrench
Phillips head and flat screwdriver.
Needle nose pliers.
Exacto knife.

The process.  Remove the bezel from the bag lid.  This is simple, just open the tabs on the inside.  Pop it off with a screwdriver.  Put the lock on the center of the hole and mark the top and bottom.  You will need to grind the hole to a round shape.  Yea! Dremel action!  I goes with out saying but wear some eye protection you will be grinding in close.

Next grind off the Thumb lock rivets on the inside of the bag. Make sure you remove everything from the bag this is a dusty operation.  Once the thumb lock is off you need to make the hole for the lock base.  This is where you drill the larger hole into the bag.  Use the grinder to make the edges round and smooth.  You will need to drill the small holes for the lock screws.
Once installed you have the option to lock or not.  And while this is not Fort Knox security,  I have a little peace of mind when leaving the bike in some strange parking lot.  It is an easy mod.  Take your time and you can get similar results.

Flip up the tabs to remove the bezel

The original thumb lock

Bezel removed.  Put the lock in to mark the top and bottom to make the hole round.  You will also need to drill holes on the side to insert the face plate.

The ground down rivet 

During the grinding process I used pliers to pop this off.

Placed the face plate into the lock to measure where to make the hole round.  Also the holes on the left and right of the new bezel.

Checking fit of the lock.

Installed with Bezel

You need to drill this hole into the saddle bag.  use the dremel to grind the hole round and drill the holes on the side.

Dremel Single Speed Rotary Tool Kit With 7 Accessories 100-N-7 (Google Affiliate Ad)Dremel Single Speed Rotary Tool Kit With 7 Accessories 100-N-7 (Google Affiliate Ad)

Inside of the bag.  I will get some thing to cover these screws. I tried tape but  it fell off.  I do not want to cut them but just might.

721 Miles!  

I hit 721 miles this past sunday and brought the bike to the shop for its first scheduled maintenance.  I also had new grips installed by the dealer.  I went with the Kuryakyn ISO grips and a throttle boss.  I noticed a difference right away.  I am not sure if I will need to add handle bar weights but time will tell.  The stock grips do have handlebar weights so I may have to add them sooner than later.  I also added engine guards and high way pegs.  I purchased the show chrome bars and Kuryaking pegs from here. The price was right the reviews were great and they bolted on quickly.  I made sure to use loctite to keep the bars secure.  As for the pegs I went with adjustable pegs.  I set up 3 different configurations to get comfortable.  Now I have them low just off the footboards.  I plan on a long ride this weekend so this will be a good test.  Up to this point I have not had the bike above 60 mph.  Keeping with in the breaking recommendations.  However after I picked it up today I did open it up to about 70 mph.

Most of the 700 miles has been from my house to the beach.  I am fortunate to live near the Jersey shore so traveling to Sandy hook and then south is a nice ride with some great scenery.   It is also all back roads to the beach through small towns so I was not able to open up the throttle.  That will change this weekend.  I am off to the parkway to go further south.  More later.

Updates Soon!
I have reached 700 miles and took the bike in for the first service.  I have added a couple of things to the bike.  Pics and links will be posted shortly

The latest additions to the bike.

Well I have 250 miles on the C50.  It has been so much fun to ride this bike.  I can feel the gears getting smoother during shifting and working our the break-in period.  I still have not had the bike over 60 mph yet.  I added lowers to the front forks to cut down the wind buffering.  They made an immediate difference.  I purchased them here.  They took about 20 minutes to install.  

The next item that I added was the interphone F5 bluetooth wireless head set to my helmet.  I purchased them from here.  These guys had the best price on the unit.  The set up was very easy.  I called some friends from the road and they did not know I was driving on the bike until I let them in on the secret!  Now we can conference calls on the road!  The very cool thing was the streaming of music to the head set and the turn by turn directions that I can hear from the gps.  

The Bluetooth unit.

I used the tape to mount to the outside of the helmet.  The unit comes with another hard mount as well.

Mounted with the Bluetooth unit.

Wires have been tucked under the padding.

The unit comes with two different mic/head set combinations.  I have a convertible helmet that can change from a full face to 3/4.  This mic will work with 3/4 helmets.

Installing the head set in the helmet was simple.  I used the adhesive tape to mount the unit on the side of the helmet.  Then I ran the wires under the padding keeping them out of the way.  The paring to the iPhone was simple and straight forward.  I highly recommend this head set.  The sound was great and the phone calls were clear.  I have yet to hook up the additional unit to conduct a conference but as soon as I do I will update the blog.